Yokogawa Data Acquisition with PID Control CX2000 Manuale Utente Scaricare il pdf (Pagina 51)

3-3

IM 04L41B01-65EN

Receiving and Sending Setup Data

Index

3.3 Sending Setup Data to the DXP

4. Click here.

5. A progress indicator appears.

6. The message “Sending finished” appears and

the received setup data is displayed.

1. Select [Comm.] - [Send Setting].

2. The [Sending data] dialog box appears.

• If the password has expired, see page 3-1.

Start sending after you change the password.

• If the data cannot be sent, an error message appears.

3. Enter the IP address, user name, user ID, and password.

Note

• ThefunctionforsendingthesetupdatatotheDXPcannotbeusedwhiletheDXPis

acquiring data or performing computation.

• Thecontentsof[Logininformation],[Batchsystemsettings],and[IPAddress]arenot

transmitted.

• Inthefollowingcases,errorsoccurandthedatacannotbesenttotheDXP.

• WhenanexternalstoragemediumisnotinsertedintheDXP.

• WhenthesetupdatatobesentdoesnotmatchthesystemconfigurationoftheDXP.

• Ifanerroroccurswhiledataisbeingsent,anerrormessageisdisplayed,andtheDXP

returns to the main screen that appears during sending. Start the procedure for sending the

data over again. The data sent before the error is not applied on the DXP.

1 2 ... 46 47 48 49 50 51 52 53 54 55

Nessun commento

Yokogawa Data Acquisition with PID Control CX2000 Manuale Utente Pagina 51